UPGRADING YOUR HARDWARE CAN PROLONG THE LIFE EXPECTANCY OF YOUR WASHROOM STALL INVESTMENT

 TOILET PARTITION HARDWARE & PRIVACY OPTIONS

BOBRICK HARDWARE

Standard - Stainless Steel

• Heavy-gauge type 304 stainless steel

• Hinges adjust for partial opening or self-closing

• Slide latch with keeper

• Clothes hook

• Emergency access inswing doors

Full-Height Stainless Steel

• Heavy-gauge type 304 stainless steel

• Self-closing hinge runs full height

• Full-height angle bracket and U-channels

• Reinforced latch, keeper

• Emergency access inswing doors

• Add suffix .67 to 1080/1180 Series Number

METPAR HARDWARE

Standard Hardware SS

Door hardware is available in die-cast (D.C.) chrome, stainless steel (S/S), investment cast stainless steel, and aluminum. The bracket hardware selection is anodized satin, bright aluminum, die-cast chrome, or stainless steel.

PHENOLIC LOCKERS

Also see phenolic lockers. More >>

PHENOLIC SCREENS

Check out our mounting options for privacy screens. More >>

WHAT IS PHENOLIC?

Phenolic resin is made by combining phenol and an aldehyde. When these organic compounds are mixed, and both pressure and heat are applied, it causes polymerization, which is a chemical reaction that can be used to mold solids. Since it is both versatile and durable, this resin is used to make a wide variety of consumer and industrial products.

DID YOU KNOW?

You can access all our technical data sheets for all our products all at the same place.  Visit our architect tools page!  Enter >>

Full Height - Piano Hinge SS

Door and bracket hardware are available in a variety of materials, for the most economical choice or the most elegant one to suit all your installation needs.

PRIVACY OPTIONS

PRIVACY PROBLEMS

• Standard 12" (305 mm) floor clearances on partition doors.

• Gaps between doors and stiles found on typical toilet partitions.

• Door latch bolts that do not lock all the way causing doors to open unintentionally

BOBRICK SOLUTION

• Bobrick partitions in all materials are available in standard 72" (1829 mm) tall doors and panels with 4-5/16" (110 mm) floor clearances. Other heights and floor clearances available upon request.

• Bobrick door hardware is designed for secure latching when installed properly - while maintaining the emergency access feature.

• Compact Laminate (CL) and Solid Core Reinforced Composite (SCRC) partitions feature an integrated Gap-Free Option to achieve no sightlines between doors and stiles. Interlocking doors and stiles are routed 0.300" (7.6 mm) from the edge to allow for 0.175" (4.4 mm) overlap.

Gap-Free No Sightlines Option and Maximum Height Option

Include under design type section 2.2 of Compact Laminate or SCRC Toilet Partition Heading.

Privacy Style Partitions

No sightlines with Gap-Free interlocking doors and stiles routed 0.300" (7.6 mm) from the edge to allow for 0.175" (4.4 mm) overlap to prevent line-of-sight into the toilet compartment. Privacy strips fastened or adhered onto the partition material are not acceptable

Maximum Height

Door/Panel Height: 72" (1829 mm) Floor Clearance: 4-5/16" (110 mm) Stile Height (varies depending on configuration selected)